-35%
The Hikvision DS-3E1505P-EI/M is a 4-port network switch. 4 ports support PoE (IEEE 802.3af,IEEE 802.3at ) with Gigabit speed , plus 1 Gigabit RJ45 Ethernet port. Product made of metal - Supports 6KV lightning protection on PoE ports - Allows signal transmission up to 300m - 2K MAC Table Address - 10Gbps switching capacity - Monitors the correct functioning of the network - PoE Watchdog for detecting cameras that do not they respond - Solution designed for video surveillance systems.
FIND INSTALLER
https://www.setik.biz/en/switch/9926-hikvision-ds-3e1505p-ei-m-hikvision-network-switch-4-ports-poe-1port-gigabit-rj45.html
€91.20
€140.30 -35%
taxes included
NETWORK SWITCH 4 ETHERNET PORTS - 4 GIGABIT PoE PORTS - 1 GIGABIT RJ45 Port - HIKVISION - DS-3E1505P-EI/M
Ethernet Switch - 4 Ports - Hikvision - DS-3E1505P-EI/M
4 Gigabit PoE Ports - 1 Gigabit RJ45 Port - 2K Mac Address - 10Gbps switching capacity - Manufactured with metal case - 6KV lightning protection - Digital signal transmission supported up to 300m PoE - PoE Watchdog functionality (automatic detection and restart of cameras unresponsive) - Ideal for configuring and managing video surveillance systems.
Product details
- Network switch - HIKVISION - DS-3E1505P-EI/M
- 4x Gigabit PoE ports
- 1x Gigabit RJ45 port
- PoE Standards Supported: IEEE 802.3af, IEEE 802.3at
- Metal
- 6KV lightning protection
- Transmission up to 300m PoE
- Monitoring the correct functioning of the network
- MAC Table Size: 2K
- 10Gbps switching capacity
- Packet Forward Rate: 7.44Mbps
- Internal cache: 1Mbits
- PoE standards: IEEE 802.3af,IEEE 802.3at
- Metal houses
- Power supply: 54V DC, 0.92A
- Operating temperature: 0°C to 40°C
- Dimensions: 121.1mm × 27.6mm × 83.1mm
- Weight: 0.26Kg
- Ideal for wall or desktop installation
Data sheet
| Model | DS-3E1505P-EI/M | ||
| Network Parameters | Ports | 4 × Gigabit PoE port,1 × Gigabit RJ45 port | |
| MAC Address Table | 2K | ||
| Switching Capacity | 10Gbps | ||
| Packet Forwarding Rate | 7.44 Mpps | ||
| Internal Cache | 1 Mbits | ||
| PoE Power Supply | Standard PoE | IEEE 802.3af,IEEE 802.3at | |
| PoE Power Pin | End-span: 1/2(-), 3/6(+) | ||
| PoE Port | PoE: Ports 1 to 4 | ||
| Max. Port Power | 30W | ||
| PoE Power Budget | 45W | ||
| Software Function | Long Range | Ports 1 to 4: up to 300 m Long range performance may vary depending on camera model or cable condition. | |
| Port Isolation | Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group | ||
| PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. | ||
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group. | ||
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default Support 802.1D STP. Support 802.1w RSTP. | ||
| VLANs | VLAN is used for network scale planning and network health improvement Support 802.1Q. Configurable VLAN ID from 1-4094 Support Trunk, Access port mode Support Max. 32 VLANs. | ||
| HPP | Support one-click activation and remote management via Hik-Partner Pro Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device | ||
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses Support Super IP, which is a fixed IP address (10.180.190.200) for direct access Support management via Hik-Central Pro Support remote management via Hik-Partner Pro Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. | ||
| General | Shell | Metal material | |
| Net Weight | 0.26 kg (0.573 lb) | ||
| Gross Weight | 0.75 kg (1.65 lb) | ||
| Dimensions (W × H × D) | 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') | ||
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | ||
| Storage Temperatures | -40 °C to 85 °C (-40 °F to 185 °F) | ||
| Operating Humidity | 5% to 95% (no condensation) | ||
| Relative Humidity | 5% to 95% (no condensation) | ||
| Power Supply | 54V DC, 0.92A | ||
| Installation Mode | Desk-Mounted,Wall-Mounted | ||
| Max. Power Consumption | 50W | ||
| Power Consumption at Idle | 1W | ||
| Surge Protection | 6 Kv | ||
| Approve | EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) | |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) | ||
| Chemistry | CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) | No.1907/2006) | |
Further details
Downloads
All our products are in conformity with the in force CE normative (read here). To ask for a copy of the certification
fill out this form
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form