The Hikvision DS-3E3752-H is a network switch with 48 SFP Base-T 10/100/1000M ports (8 of which with combo interface) + 4 SFP+ 10G/1G BASE-X SFP+ ports. Integrate 1 expansion slot, 2 slots with support for fans, 2 slots for power module - Packet forward rate: 252Mbps - Overall switching capacity: 336Gbps - High quality product.
FIND INSTALLER
€5,975.26
€9,192.70 -35%
HIKVISION MANAGED NETWORK SWITCH - 48 PORTS BASE-T 10/100/1000M + 4 PORTS 10G/1G BASE-X SFP+ / DS-3E3752-H
48 SFP Base-T 10/100/1000M ports (of which 8 with Combo interface) + 4 10G/1G SFP+ ports - 1 expansion slot, 2 fan tray slots, 2 power module slots - Total switching capacity 336Gbps - Packet Forwarding Rate: 252Mbps - 1G/10G/40G port aggregation - Dimensions: 440×360×43.6 - Net weight 7Kg.
Product details
- Network Switch - Hikvision - DS-3E3752-H
- 48 Base-T 10/100/1000M ports (of which 8x Combo interface)
- 4 Ports 10G/1G SFP+
- 1 expansion slot
- 2 fan tray slots
- 2 slots for power module
- Switching Capcity: 336Gbps
- Forwarding Rate (PAcket Forwarding Rate) 252Mbps
- Diet:
AC?100V?240V AC?50/60Hz
A.D? -48V?-60V DC - Dimensions: 440×360×43.6
- Item net weight: 7kg
- Operating temperature: 0ºC to 45ºC
- Humidity: 5% RH to 95% RH, non-condensing
Data sheet
Item | DS-3E3752-H | ||
Service ports | 48×10/100/1000BASE-T ports, 4×10G/1G BASE-X SFP+ ports | ||
Switching capacity | 336Gbps | ||
Packet forwarding installments | 252 Mpps | ||
Dimensions (W×D×H)?mm? | 440×360×43.6 | ||
Input voltage | AC?100V?240V AC?50/60Hz A.D? -48V?-60V DC | ||
Power consumption (full configuration) | Single AC input: 87W Single AC input: 112W Single AC input: 88 W Dual AC inputs: 93 W Single DC input: 89 W Dual AC inputs: 91W Dual AC inputs: 116W Single DC input: 88W Single DC input: 113W Dual DC inputs: 95W Dual DC inputs: 122W Dual DC inputs: 96W | ||
Weight | ≤7.0kg | ||
Operating temperatures | 0ºC to 45ºC (32°F to 113°F) | ||
Operating humidity | 5% RH to 95% RH, non-condensing | ||
Layer 2 ring network protocol | STP/RSTP/MSTP |
VLANs | Port-based VLAN MAC-based VLAN Protocol-based VLAN QinQ and selective QinQ |
Port features | IEEE802.3x flow control (full duplex) Storm control based on port rate percentage PPS/BPS-based storm against |
IP routing | Static routing RIPv1/v2 and RIPng OSPFv1/v2/v3 BGP and BGP4+ for IPv6 |
Multicast | IGMP Snooping /MLD Snooping ?Multicast VLAN |
|
SDN/Openflow | OpenFlow 1.3 |
VXLAN | VXLAN Layer 2 switching VXLAN routing switching VXLAN gateway |
Link aggregation | 1G/10G/40G port aggregation Static aggregation/Dynamic aggregation Cross-device aggregation |
Mirroring | Port mirroring RSPAN Traffic mirroring |
Stacks | Distributed device management, distributed link aggregation, and distributed resilient routing Stacking through standard Ethernet interfaces Local device stacking and remote device stacking |
ACL | Packet filtering at L2 ?L4 Traffic classification based on source MAC addresses, destination MAC addresses, source IPv4/IPv6 addresses Time range-based ACL VLAN-based ACL Bidirectional ACL |
Security | Hierarchical user management and password protection Guest VLAN 802.1X authentication, centralized MAC authentication RADIUS authentication MAC address learning limit Port isolation IP Source guard Dynamic ARP inspection, preventing man-in-the-middle attacks and ARP DoS attacks IP/Port/MAC binding |
QoS | 802.1p DSCP remarking Flexible queue scheduling algorithms based on ports and queues, including SP, WRR, WFQ and SP+WRR Committed access rate (CAR) Packet redirection Port rate limit (receiving and transmitting) |
Management and maintenance | Configuration through CLI, Telnet, and console port Ping, Tracert Loading and upgrading through XModem/FTP/TFTP SNMPv1/v2/v3 and Web-based NMS Remote monitoring (RMON ) alarm, event, and history recording NTP |
Further details
Downloads
Questions (0)
No customer questions for the moment.