The DS-3E1106P-EI from Hikvision, is a managed network switch with 4 PoE ports (IEEE 802.3at/af) and 2 RJ45 uplink ports 100Mbps - 6kV lightning protection - 2K MAC Table Size - Switching capacity 14Gbps - Packet Forwarding Rate: 10.42 Mpps - Max PoE transmission distance: 300m - Metal structure - For wall or desk mounting - Watchdog - Remote update.
FIND INSTALLER
NETWORK SWITCH 4 PORTS ETHERNET POE 10/100MBPS - 2 PORTS UPLINK RJ45 10/100MBPS - HIKVISION - DS-3E1106P-EI
Managed ethernet switch - Hikvision - DS-3E1106P-EI
4 PoE Ports 10/100Mbps - 2 RJ45 Ports 10/100Mbps - Mac Address 2K - Structure made of metal - Lightning protection 6KV - Signal transmission supported up to 300m - Watchdog - MAC Address Table 2K - Switching capacity 14Gbps - Packet Frowarding Rate: 10.42 Mpps - Metal body - Ideal for configuring and managing video surveillance systems.
Product details
- Network Switch - Hikvision - DS-3E1106P-EI
- 4 PoE 10/100Mbps Ethernet ports
- 2 RJ45 10/100 Mbps ports
- Supported Standards: IEEE 802.3at/af
- Device structure: Metal
- 6KV lightning protection
- Watchdog function
- Data transmission up to 300m
- MAC Table Size: 2K
- Packet Forwarding rate: 10.42 Mpps
- 14Gbps switching capacity
- Remotely upgradeable
- For wall or desk mounting
- Power supply: 54 V DC, 1.2 A
- Dimensions: 121.1mm × 27.6mm × 83.1mm
- Weight: 0.27kg
- Operating temperature: 0°C to 40°C
Data sheet
| DS-3E1106P-EI | ||
Network Parameters | Ports | 4 × 10/100Mbps PoE port,2 × 10/100Mbps RJ45 port |
MAC Address Table | 2K | |
Switching Capacity | 14Gbps | |
Packet Forwarding Rate | 10.42 Mpps | |
Internal Cache | 1 Mbits | |
PoE Power Supply | Standard PoE | IEEE 802.3af,IEEE 802.3at |
PoE Power Pin | End-span: 1/2(-), 3/6(+) | |
PoE Port | PoE: Ports 1 to 4 | |
Max. Port Power | 30W | |
PoE Power Budget | 60W | |
Software Function | Long Range | Ports 1 to 4: up to 300 m. Long range performance may vary depending on camera model or cable condition. |
VIP Port | Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. | |
Port Isolation | Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. | |
PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. | |
Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation groups. | |
Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. | |
VLANs | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLANs. | |
HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. | |
System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management | |
IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. | ||
General | Shell | Metal material |
Net Weight | 0.27 kg (0.6 lb) | |
Gross Weight | 0.77 kg (1.7 lb) | |
Dimensions (W × H × D) | 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') | |
Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
Storage Temperatures | -40 °C to 85 °C (-40 °F to 185 °F) | |
Operating Humidity | 5% to 95% (no condensation) | |
Relative Humidity | 5% to 95% (no condensation) | |
Power Supply | 54V DC, 1.2A | |
Installation Mode | Desk-Mounted,Wall-Mounted | |
Max. Power Consumption | 65W | |
Power Consumption at Idle | 1.6W | |
Surge Protection | 6kV | |
Approval | EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) | |
Chemistry | Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU) |
Further details
Downloads
Questions (0)
No customer questions for the moment.