SW16+3POE Setik Switch 16 PoE Ports 10/100Mbps + 2 UpLink Ports 10/100/1000Mbps and 1 SFP 10/100/1000Mbps with range up to 250MT . Standard PoE 802.3af/at support, Maximum power 250W , transmission on cat5/5e/6 cable, PoE af power 15.4W / at 30W (single port), status LED. Tamper-proof closure, protected against lightning, interference, anti-static. Ideal for desktop or wall use
€121.39
€242.78 -50%![](https://cdn.setik.biz/img/click.png)
SWITCH 16 POE PORTS + 2 UPLINK PORTS + 1 SFP - 10/100/1000MBPS 250W - UP TO 250 METERS - SETIK
![Made by Setik width= Made by Setik](https://www.setik.biz/img/m/7-prod_large.jpg)
Coverage up to 250 meters - Support Standard 802.3af and 802.3at , Maximum power 250W
Transmission on cat5/5e/6 cable - status LED - Lightning protected
![8 Port Switch + 1 Uplink - SW8+1POE Switch 16 porte PoE + 2 porte Uplink + 1 SFP](https://www.setik.biz/storage/images/Articoli/SW16+3POE_SMALL.png)
- 16-Port 10/100Mbps PoE Switch with 16 PoE Ports and 2 Uplink Ports and 1 SFP Port;
- 16 PoE ports 10/100 Mbps, 2 uplink ports 10/100/1000 Mbps, 1 SFP port 10/100/1000 Mbps;
- Support IEEE802.3AF/AT;
- Built-in DC52V 4.8A 250W power supply;
- The communication distance extends up to 250 meters;
- All ports are supported by MDI/MDIX auto flip and auto-negotiation;
- Support 16 10/100Mbps high-speed adaptive forwarding data packets without loss;
- Supports IEEE802.3x flow control for Full-duplex mode and backpressure for Half-duplex mode;
- Fanless, natural cooling, small, compact and quiet design, suitable for desktop or wall;
- Application: Wireless access point, IP camera, IP phone, computer networks, etc.
- Black color
- 24 Months Italian Warranty
Technical data sheet
Model | SW16+3POE |
System | |
POE Ethernet Port | 16*10/100Mbps; RJ45 ports; Max. 30W; Max. 250M |
Uplink Port | 2*10/100/1000Mbps; Max. 100M |
SFP Port | 1*10/100/1000Mbps |
Transmission Medium | Cat5/ 5E/ 6 standard Network Cable |
Network Standard | IEEE 802.3i, 802.3u, IEEE 802.3x, IEEE 802.3af |
Switch Capacity | 7.2Gbps Full duplex |
Packet Forwarding Rate | 0.1488Mpps/port |
Forwarding Mode | Store and Forward |
MAC Table | 2K |
POEStandard | IEEE802.3af, IEEE802.3at |
PoE Power Supply Type | End-Span(1/2: +; 3/6: -) |
PoE Data Pin | 1/2: +; 3/6: - |
POE Power Consumption | af=15.4W(every port), af=30W(every port) |
Transmission Distance | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function |
PoEFeature | All ports support MDI/MDIX |
Power Indicator | Light on: Powering; Light off: No Power |
VLAN Indicator | Green light on: VLAN mode; Light off: normal mode |
PoE Port indicator | Light off: Link is disconnected, Red light on: Powering but data disconnected, Light flash quickly: Data Transmitting |
Power Source | Built-in Power Supply: Input: 110-264VAC, 50/60Hz |
PoE Power Budget | DC52V 4.8A 250W |
Power Consumption | <5W |
ESD | Air discharge: 1.5KV, Contact discharge: 1.5KV |
Anti-Thunder Level | Common mode: 2KV, Differential mode: 1.5KV |
Working temperature | -10℃-50℃ |
Relative Humidity | 10%-95%, non-condensing |
Storage Temperature | -40℃-70℃ |
Dimensions (L×W×H) | 312*185*46mm |
Color | Black |
Weight | 2KG |
Further details
SW4+2POE | SW8+2POE | SW16+3POE | |
POE Ethernet port | 4*10/100Mbps; RJ45 ports; Max. 30W; Max. 250M | 8*10/100Mbps; RJ45 ports; Max. 30W- 250M | 16*10/100Mbps; RJ45 ports; Max. 30W; Max. 250M |
Uplink port | 2*10/100Mbps; Max. 100M | 2*10/100Mbps; Max. 100M | 2*10/100Mbps; Max. 100M |
Packet Forwarding Rate | 0.1488Mpps/port | 0.1488Mpps/port | 0.1488Mpps/port |
MAC table | 2K | 2K | 2K |
POEStandard | IEEE802.3af, IEEE802.3at | IEEE802.3af, IEEE802.3at | IEEE802.3af, IEEE802.3at |
POE power consumption | af=15.4W(every port), af=30W(every port) | af=15.4W(every port), af=30W(every port) | af=15.4W(every port), af=30W(every port) |
Transmission Distance | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function |
POE Source | Built-in Power Supply: Input: 110-264VAC, 50/60Hz | Built-in Power Supply: Input: 110-264VAC, 50/60Hz | Built-in Power Supply: Input: 110-264VAC, 50/60Hz |
POE Power Budget | DC52V, 1.15A, 65W | DC52V 2.3A 120W | DC52V 4.8A 250W |
Power Consumption | <5W | <5W | <5W |
Dimensions (L×W×H) | 202x140x45 mm | 202x140x45 mm | 312x185x46mm |
Weight | 0.68kg | 1KG | 2KG |
...read more! |
---|
PoE products are essential for powering peripherals on the network. The standards currently in existence are 802.3af and 802.3at, in addition to a host of NON-STANDARD products: make sure you only buy products that fall within these standards so you can guarantee any compatibility in the present and future. Setìk imports, distributes and guarantees its products suitable for supporting any PoE peripheral. |
Download
⯈ Complete your purchase
Questions (0)
No customer questions for the moment.