Setik SW4+2POE Switch 4 Port PoE + 2 UpLink Port with range up to 250 meters! Standard support 802.3af and 802.3at, 10/100Mbps, Maximum power 65W . Protection against lightning, anti-static and anti-interference. Power supply included, compact design, ideal for desktop or wall use.
€35.99
€71.98 -50%![](https://cdn.setik.biz/img/click.png)
SETIK SW4+2POE | 4 PORT SWITCH + POE + 2 UPLINK 65W
![SW4+2POE_SMALL.png](https://www.setik.biz/storage/images/Articoli/SW4+2POE_SMALL.png)
Of the 6 ports it is equipped with, 4 are PoE and 2 are PoE Uplink Data and Power.
It supports IEEE 802.3af and 802.3at standards and thanks to the button on the front panel, it is possible to extend the transmission distance from 100 to 250 meters. Maximum power 65W
Lightning protection, anti-static and anti-interference
Characteristics:
◆ 4-port 10/100Mbps PoE switch with 4 PoE ports and 2 uplink ports |
REDUCTION OF INFRASTRUCTURE COSTS: |
REDUCED INSTALLATION TIMES: With a PoE switch, your installation time will be significantly reduced. |
WIRED NETWORK EXTENSION: |
Product details
![4 Port Switch + 1 Uplink - SW4+1POE Switch 4 porte PoE + 2 porte Uplink fino a 250metri](https://www.setik.biz/storage/images/Articoli/SW4+2POE_SMALL.png)
- 4-port 10/100Mbps PoE switch with 4 PoE ports and 2 uplink ports;
- 4 PoE ports 10/100 Mbps, 2 uplink ports 10/100 Mbps;
- Support IEEE802.3AF/AT;
- Built-in DC52V 1.15A 65W power supply;
- The communication distance extends up to 250 meters;
- All ports supported by MDI/MDIX auto flip and auto-negotiation;
- Support 4*10/100Mbps lossless high-speed adaptive data packets;
- Supports IEEE802.3x flow control for Full-duplex mode and backpressure for Half-duplex mode;
- Fanless, natural cooling, small, compact and quiet design, suitable for desktop or wall;
- Application: Wireless access point, IP camera, IP phone, computer networks, etc.
- Black color
- Size: 202*140*45mm
Technical data sheet
Model | SW4+2POE |
System | |
POE Ethernet port |
4*10/100Mbps; RJ45 ports; Max. 30W; Max. 250M |
Uplink port |
2*10/100Mbps; Max. 100M |
SFP Port |
N/A |
Transmission Medium |
Cat5/ 5E/ 6 standard Network Cable |
Standard Network |
IEEE 802.3i, 802.3u, IEEE 802.3x, IEEE 802.3af |
Switch Capacity |
1.2Gbps Full duplex |
Packet Forwarding Rate |
0.1488Mpps/port |
Forwarding Mode: |
Store and Forward |
MAC table |
2K |
POEStandard |
IEEE802.3af, IEEE802.3at |
POE power supply type |
End-Span(1/2: +; 3/6: -) |
POE Data Pin |
1/2: +; 3/6: - |
POE power consumption |
af=15.4W(every port), af=30W(every port) |
Transmission Distance |
0-100m/100Mbps, 0-250m/10Mbps after used Extender function |
POEFeature |
All ports support MDI/MDIX |
Power Indicator |
Light on: Powering; Light off: No Power |
VLAN Indicator |
Green light on: VLAN mode; Light off: normal mode |
POE Port Indicator |
Light off: Link is disconnected, Red light on: Powering but data disconnected, Light flash quickly: Data Transmitting |
POE Source |
Built-in Power Supply: Input: 110-264VAC, 50/60Hz |
POE Power Budget |
DC52V, 1.15A, 65W |
Power Consumption |
<5W |
ESD |
Air discharge: 1.5KV, Contact discharge: 1.5KV |
Anti-Thunder Level |
Common mode: 2KV, Differential mode: 1.5KV |
Working temperature |
-10℃-50℃ |
Relative humidity |
10%-95%, non-condensing |
Storage temperatures |
-40℃-70℃ |
Dimensions (L×W×H) |
202*140*45mm |
Color |
Black |
Weight |
0.68kg(not include input cable & packaging) |
Further details
...read more! |
---|
PoE products are essential for powering peripherals on the network. The current standards are 802.3af and 802.3at, as well as a lot of NON-STANDARD products: make sure you only buy products that fall within these standards so you can guarantee any compatibility. in the present and in the future. Setìk imports, distributes and guarantees its products suitable for supporting any PoE peripheral. |
Download
⯈ Complete your purchase
Questions (0)
No customer questions for the moment.