-35%
New
Hikvision DS-3E1318P-EI/M is an intelligent switch with 16 10/100 Mbps PoE ports + 1 Gigabit RJ45 + 1 × Gigabit combo. The PoE ports are equipped with 6KV surge protection and IEEE 802.3at/af standards . PoE Watchdog function to automatically detect and reboot unresponsive cameras. Network topology management, alarm push, network status monitoring. AF/AT camera can reach up to 300m in extended mode. Various layer 2 management protocols such as VLAN
FIND INSTALLER
INTELLIGENT SWITCH 16 PORTS 10/100 Mbps POE + 1 GIGABIT RJ45 + 1 GIGABIT COMBO - HIKVISION
Smart Switch - Hikvision
16 10/100 Mbps PoE ports + 1 Gigabit RJ45 + 1 × Gigabit combo - PoE Watchdog function - For PoE ports: 6KV surge protection and IEEE 802.3at/af standards - Various layer 2 management protocols
Product details
- Smart Switch - Hikvision
- 16 ports 10/100 Mbps PoE + 1 Gigabit RJ45 + 1 × Gigabit combo
- IEEE 802.3at/af standard for PoE ports
- Network topology management
- Push alarms
- Network health monitoring
- 6KV Surge Protection for PoE Ports
- The AF/AT camera can reach up to 300m in extended mode
- PoE Watchdog to automatically detect and reboot unresponsive cameras
- Various layer 2 management protocols such as VLAN
Technical data sheet
| Model | DS-3E1318P-EI/M |
| General | |
| Shell | Metal material |
| Net Weight | 1.8kg (4.0lb) |
| Gross Weight | 3.0 kg (6.6 lb) |
| Dimensions (W × H × D) | 440.00 mm × 44.00 mm × 220.80 mm (17.32'' × 1.73'' × 8.69'') |
| Operating Temperature | 0 °C to 45 °C (0 °F to 113 °F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Power Supply | 100-240 VAC, 50/60 Hz, Max. 3 A |
| Installation Mode | Rack (equipped with mounting ears) |
| Max. Power Consumption | 150W |
| Power Consumption at Idle | 20W |
| Surge Protection | 6 KV |
| Network Parameters | |
| Port Number | 16×10/100Mbps PoE port,1×Gigabit RJ45 port,1×Gigabit combo |
| MAC Address Table | 16K |
| Switching Capacity | Whole-Device Performance: 9.2 Gbps Port Performance: 7.2 Gbps |
| Packet Forwarding Rate | Whole-Device Performance: 6.84 Mpps Port Performance: 5.36 Mpps |
| Internal Cache | 4 Mbits |
| PoE Power Supply | |
| PoE Standard | IEEE 802.3af, IEEE 802.3at |
| PoE Power Pin |
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Port | PoE: Ports 1 to 16 |
| Max. Port Power | 30W |
| PoE Power Budget | 130W |
| Software Function | |
| Long Range | Transmission up to 300 m Long range performance may vary depending on camera model or cable condition. |
| Port Isolation | Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 16: auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. |
| Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLANs. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. |
| Approval | |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU) WEEE (2012/19/EU) Reach (Regulation (EC) No.1907/2006) |
Further details
Download
All our products are in conformity with the in force CE normative (read here). To ask for a copy of the certification
fill out this form
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form