The Hikvision DS-3E1518P-EI is a managed network smart switch.
Features: 16 Gigabit RJ45 PoE Ports + 1 Gigabit RJ45 Port + 1 Gigabit Fiber Optic Port - Data transmission supports PoE (IEEE 802.3af, IEEE 802.3at) - PoE data transmission up to 300m - 6kV lightning protection system - PoE support Watchdog - Total PoE Power Budget 230W. Switching Capacity 56Gbps - Packet Forwarding Rate 41.66Mbits - MAC Table 8K - Metal body.
FIND INSTALLER
NETWORK SWITCH 16 ETHERNET PORTS - 16 GIGABIT PoE Ports - 1 GIGABIT RJ45 PORT - 1 GIGABIT FIBER OPTICAL PORT - WATCHDOG - HIKVISION - DS-3E1518P-EI
Ethernet switch - Hikvision - DS-3E1518P-EI
16 Ethernet ports - 16 Gigabit RJ45 PoE ports - 1 Gigabit RJ45 port - 1 Gigabit fiber optic port - Total PoE Power Budget: 230W - Mac Table Size Address 8K - Switching capacity 5.6Gbps - Packet Forwarding rate 41.66Mbits - For rack installation - 6KV lightning protection - Metal design - PoE Watchdog - Very long distance transmissions up to 300m - Ideal product for use in video surveillance systems.
Product details
- Network Switch - Hikvision - DS-3E1518P-EI
- 16 PoE RJ45 Gigabit Ethernet ports
- 1 Gigabit RJ45 port
- 1 Gigabit fiber optic port
- PoE Standards Supported: IEEE 802.3af, IEEE 802.3at
- Total PoE Power Budget 230W
- Metal houses
- MAC Address Table 8K
- 5.6Gbps switching capacity
- Packet Forwarding rate 41.66Mbits
- Dimensions: 440.0mm × 220.8mm × 44.0mm
- Weight: 2.85kg
- Max. power per port equal to 30W
- Supports PoE Watchdog
- 6KV lightning protection
- Long distance PoE data transmissions up to 300m
- Maximum power 250W
- Operating temperature: 0 °C to 45 °C
- Power supply: 100~240 V AC, 50/60 Hz, Max. 4 A
- For rack installation
Data sheet
| DS-3E1518P-EI | |
General | |
Shell | Metal material |
Net Weight | 2.85 kg (6.28 lb) |
Gross Weight | 3.05 kg (6.72 lb) |
Dimensions (W × H × D) | 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'') |
Operating Temperature | 0 °C to 45 °C (32 °F to 113 °F) |
Storage Temperatures | -40 °C to 85 °C (-40 °F to 185 °F) |
Operating Humidity | 5% to 95% (no condensation) |
Relative Humidity | 5% to 95% (no condensation) |
Power Supply | 100~240 V AC, 50/60 Hz, Max. 4 A |
Installation Mode | Rack (equipped with mounting ears) |
Max. Power Consumption | 250W |
Power Consumption at Idle | 20W |
Surge Protection | 6kV |
Network Parameters | |
Ports | 16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
MAC Address Table | 8K |
Switching Capacity | 56Gbps |
Packet Forwarding Rate | 41.66 Mpps |
Internal Cache | 4.1 Mbits |
PoE Power Supply | |
Standard PoE | IEEE 802.3af,IEEE 802.3at |
PoE Power Pin | 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
PoE Port | PoE: Ports 1 to 16 |
Max. Port Power | 30W |
PoE Power Budget | 230W |
Software Function | |
Long Range | Ports 1 to 16: up to 300 m. Long range performance may vary depending on camera model or cable condition. |
Port Isolation | Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
PoE Watchdog | Ports 1 to 16: auto detect and restart the cameras that do not respond. |
Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. |
Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. |
VLANs | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLANs. |
HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. |
Approval | |
EMC | CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017) |
Safety | CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011 +A2: 2013, EN 62368-1: 2014+A11: 2017) |
Chemistry | CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006) |
Further details
Downloads
Questions (0)
No customer questions for the moment.