SW8+2POE Switch 8 PoE Ports Max.30W - with range up to 250 meters + 2 UpLink Ports with range up to 100 meters, Standard PoE 802.3af/at, 10/100Mbps, Maximum PoE power 120 W , transmission on cat5/5e/6 cable, PoE power af 15.4 / at 30W (single port), status LED.
FIND INSTALLER
€48.19
€96.38 -50%
discover the available quantity
SWITCH 8 POE PORTS + 2 UPLINK PORTS - 10/100MBPS 120W - UP TO 250 METERS - SETIK
8 Port PoE Switch + 2 Uplink Ports - SetikCoverage up to 250 meters - Support Standard 802.3af and 802.3at , Maximum power 120W
Transmission on cat5/5e/6 cable - status LED
Product details
- 8-port 10/100Mbps PoE switch with 8 PoE ports and 2 uplink ports;
- 8 PoE ports 10/100 Mbps, 2 uplink ports 10/100 Mbps;
- Support IEEE802.3AF/AT;
- Built-in DC52V 2.3A 120W power supply;
- The communication distance extends up to 250 meters;
- All ports supported by MDI/MDIX auto flip and auto-negotiation;
- Support 8*10/100Mbps lossless high-speed adaptive data packets;
- Supports IEEE802.3x flow control for Full-duplex mode and backpressure for Half-duplex mode;
- Fanless, natural cooling, small, compact and quiet design, suitable for desktop or wall;
- Application: Wireless access point, IP camera, IP phone, computer networks, etc.
- Black color
- 24 Months Italian Warranty
Technical data sheet
| 8 Ports Switch with 8*10/100Mbps PoE Ports & 2*10/100Mbps Uplink Ports | ||
| Model | SW8+2POE | |
| Network Ports | POE Ethernet Port | 8*10/100Mbps; RJ45 ports; Max. 30W- 250M |
| Uplink Port | 2*10/100Mbps; Max. 100M | |
| SFP Port | N/A | |
| Transmission Medium | Cat5/ 5E/ 6 standard Network Cable | |
| Standard | Network Standard | IEEE 802.3i, 802.3u, IEEE 802.3x, IEEE 802.3af |
| Switch Capacity | 2Gbps Full duplex | |
| Packet Forwarding Rate | 0.1488Mpps/port | |
| Forwarding Mode: | Store and Forward | |
| MAC Table | 2K | |
| Power Over Ethernet | POEStandard | IEEE802.3af, IEEE802.3at |
| POE Power Supply Type | End-Span(1/2: +; 3/6: -) | |
| PoE Data Pin | 1/2: +; 3/6: - | |
| POE Power Consumption | af=15.4W(every port), af=30W(every port) | |
| Transmission Distance: | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function | |
| PoEFeature | All ports support MDI/MDIX | |
| LED Status Indicator | Power Indicator | Light on: Powering; Light off: No Power |
| VLAN Indicator | Green light on: VLAN mode; Light off: normal mode | |
| PoE Port indicator | Light off: Link is disconnected, Red light on: Powering but data disconnected, Light flash quickly: Data Transmitting | |
| General | Power Source | Built-in Power Supply: Input: 110-264VAC, 50/60Hz |
| PoE Power Budget | DC52V 2.3A 120W | |
| Power Consumption: | <5W | |
| ESD | Air discharge: 1.5KV, Contact discharge: 1.5KV | |
| Anti-Thunder Level | Common mode: 2KV, Differential mode: 1.5KV | |
| Working temperature | -10°C -50°C | |
| Relative Humidity | 10%-95%, non-condensing | |
| Storage Temperature | -40 ? -70 ? | |
| Dimensions (L×W×H) | 202*140*45mm | |
| Color | Black | |
| Weight | 1KG | |
Further details
| SW4+2POE | SW8+2POE | SW16+3POE | |
| POE Ethernet port | 4*10/100Mbps; RJ45 ports; Max. 30W; Max. 250M | 8*10/100Mbps; RJ45 ports; Max. 30W- 250M | 16*10/100Mbps; RJ45 ports; Max. 30W; Max. 250M |
| Uplink port | 2*10/100Mbps; Max. 100M | 2*10/100Mbps; Max. 100M | 2*10/100Mbps; Max. 100M |
| Packet Forwarding Rate | 0.1488Mpps/port | 0.1488Mpps/port | 0.1488Mpps/port |
| MAC table | 2K | 2K | 2K |
| POEStandard | IEEE802.3af, IEEE802.3at | IEEE802.3af, IEEE802.3at | IEEE802.3af, IEEE802.3at |
| POE power consumption | af=15.4W(every port), af=30W(every port) | af=15.4W(every port), af=30W(every port) | af=15.4W(every port), af=30W(every port) |
| Transmission Distance | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function | 0-100m/100Mbps, 0-250m/10Mbps after used Extender function |
| POE Source | Built-in Power Supply: Input: 110-264VAC, 50/60Hz | Built-in Power Supply: Input: 110-264VAC, 50/60Hz | Built-in Power Supply: Input: 110-264VAC, 50/60Hz |
| POE Power Budget | DC52V, 1.15A, 65W | DC52V 2.3A 120W | DC52V 4.8A 250W |
| Power Consumption | <5W | <5W | <5W |
| Dimensions (L×W×H) | 202x140x45 mm | 202x140x45 mm | 312x185x46mm |
| Weight | 0.68kg | 1KG | 2KG |
| ...read more! |
|---|
PoE products are essential for powering peripherals on the network. The standards currently in existence are 802.3af and 802.3at, in addition to a host of NON-STANDARD products: make sure you only buy products that fall within these standards so you can guarantee any compatibility in the present and future. Setìk imports, distributes and guarantees its products suitable for supporting any PoE peripheral. |
| ...read more! |
|---|
PoE products are essential for powering peripherals on the network. The standards currently in existence are 802.3af and 802.3at, in addition to a host of NON-STANDARD products: make sure you only buy products that fall within these standards so you can guarantee any compatibility in the present and future. Setìk imports, distributes and guarantees its products suitable for supporting any PoE peripheral. |
Download
Questions (0)
No customer questions for the moment.