NEW IP - OUTLET PROFESSIONAL TESTER

A new generation of Tester suitable for the IP market with many new features introduced.
12V output NOT working!

PRODUCT DETAILS:

THE PRODUCT REPRESENTED RETURNS IN ONE OF THESE CATEGORIES: P RODOTTI USATO - RICONDIZIONATO - CAMPIONI - OUT OF CATALOG THE WARRANTY ON THESE PRODUCTS IS LIMITED AS FOLLOWS: - 15GG SATISFIED OR REFUNDED, NO OTHER WARRANTIES - THE PRODUCTS ARE ALL TESTED AND TESTED BEFORE YOU ARE SOLD - THE PRODUCT MAY NOT BE IN ITS ORIGINAL BOX - THE PRODUCT MAY DIFFER FROM THE IMAGE

WITH ITALIAN SOFTWARE!
12V output NOT working!
The new generation includes a series of very useful functions:

	PTZ Controller, possibility to control PTZ cameras both in RS232 and 485 and 422 for all available Pan, Tilt, Zoom, Adjust focus, Preset, etc functions, as well as the recognition of over 30 protocols including Pelco-D, Pelco-P, Panasonic , Samsung, Yaan and many others
	IMAGE GENERATOR, Generate single color images or the Color Bar or finally the monoscope useful to see the details and the eventual image curvature, fundamental for high installation quality and to test the quality of the cameras
	VIDEO LEVEL METER, is able to detect the levels "Peak", "Sync", "Burst", so as to know the "quality" of the signal and eventually act on the cable, on the manual there are the correct levels to work with
	VIDEO SETTING, It allows to Act on Contrast, Saturation, Luminosity so as to modify them and evaluate the best setting
	PLAYBACK, View the recorded images or videos, the recording function is particularly useful in cases where it is necessary to take a camera position (maintenance) or during installation, so as to avoid possible disputes in case of problems, the recording takes place on the MicroSD 2GB and then you can download the image by connecting the tester to the PC
	SCAN, allows you to detect on the UTP cable where the possible audio signal is present, and also detecting the signal strength
	PING, allows me to ping specific IP addresses, in this way I evaluate the possible loss of packets and the functionality of the network (NVR reachability, packet loss, latency, etc.)
	Cable Tester, Detects any broken cables inside the UTP cable, useful for correct field checks in case of broken wiring
	Port Flicker, Useful as connected to a PoE port, it makes it flash in order to quickly locate it on the device side, so as to detach only the necessary door and not remove the wrong apparatus, very useful in case of maintenance
	Link Monitor, detects the presence of a single IP, before assigning it to a new device, devices with the same IP create conflicts within the network creating significant problems
	IP SCAN, It scans the entire network by detecting the presence of all the devices present, so as to evaluate any available IP or detect if all are reachable, fundamental in the installation of IP cameras
	POE TESTER, It detects the correct operation of a PoE device and the pins used for power supply as well as the voltage required by the devices, very useful in all those diagnostic phases where problems arise on the PoE, indispensable for any installer
	Digital Multimeter, an INDISPENSABLE Digital Multimeter for any installer, this model allows the DC / AC measurement, Resistance, Diodes, Continuity, Capacity, it is self-contained, also avoiding the need to define the scale, to manual all the possible functions
	VISIBLE LASER, It emits a Laser signal from 650nm, 10mW so as to be able to carry out an optical verification of the Fiber, power and wave can be modified
	TDR, detects interrupted cabins for all the supported types CAT5E, CAT6, 75-3, 75-5, and many others indicating also the distance where the cable is interrupted, a function definitely indispensable in conditions of intervention on tampered or non-functioning systems, allowing you to save a great deal of time and reducing the intervention time, and also indicates the length of the cable
	Data Monitor, necessary for the analysis of traffic on the RS232 / RS485, and to recognize any problems, or to identify the standard used by the camera.
	Time Setting, It allows to set the time / day, necessary if it wants to be displayed on the recorded images
	Device Setting, Tester language and settings
	USB, Connected to the PC allows you to download images and eventually update the Tester

MOREOVER:

3.5 "High Definition LCD Display 480X320
Led lamp for working in dark conditions
MicroSD 2GB that allows you to store the images and video of the cameras, fundamental in the tests and in the tests for the points of view
Possibility to Zoom on the image up to 10X
Output 12V 1A to test the cameras without power supply (NOT WORKING)
Audio Test, for verification of operation and background noise
Over 11 Hours of Autonomy
Battery charger and automatic use
Automatic energy saving mode
Supplied with Bag, Power Supply, Lan tester, Strap, Video Cable

Data sheet

tr> DC12V 1A power Output (not working)
tr> Audio Input Test
tr> RS485 Data Analysis
tr> 10X Zoom Image
tr> Photograph, Video record, Record Playback
tr> Port Flicker