4in1 Varifocal Dome camera 2.7-13.5mm - 2MP - IP67 and IK10 - Smart IR 60m - S2

Product Details

Data sheet

HAC-HDBW2241RA-ZA-S2-DG

Room

Image Sensor

2MP CMOS

Max.Resolution

1920(H)×1080(V)

Pixels

2MP

Scanning System

Progressives

Electronic Shutter Speed

PAL: 1/25s–1/100,000s NTSC: 1/30s–1/100,000s

S/N Ratio

> 65dB

Min Illumination

0.001 Lux/F1.5, 30 IRE, 0 Lux IR on

Illumination Distance

60m (196.9ft)

Illuminator On/Off Control

Car

This camera is a FOUR HYBRID (4 Integrated Technologies)
These cameras are Analogue , Ahd , Hdcvi and Hdtvi at the same time .

The technologies are switchable via DIP Switch on the BNC port.

This camera features a resolution of 2Megapixel FULL-HD 1080P :

This camera features 2.7-13.5mm varifocal lens with motorized zoom and automatic focus (AUTO-FOCUS)

Motorized zoom example:

The 2MP 1920x1080p progressive scan CMOS sensor of this camera integrates STARLIGHT technology!

Low brightness, color vision even in night mode.

Normally, when entering night mode, the color vision becomes black/white.

With the SENSOR present, night shots will be clear and in colour

IR illuminator with 3 leds and approximate range of 60 meters

BENEFITS:

• - High brightness
• - Reduced energy consumption
• - Small size
• - Long duration

This camera is also equipped with SMART IR technology.
Through this technology , the light emitted by the LEDs is adapted according to the object framed.

ULTRA WDR up to 130dB
WDR (Wide Dynamic Range): It is the professional solution in cases where it is necessary to operate in conditions of high light/shadow contrast. Fundamental in case of shooting from inside to outside, plates, shadowed points or all situations where there is no homogeneity of light.
Allows you to adapt the lens to Night/Day vision

The IR CUT FILTER is a mechanical filter that allows correct viewing of images in daytime viewing conditions. It filters out typical infrared frequencies, thus improving image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies.
BLC (Back Light Compensation) is one of the 3 possible Steps in the management of images with Contrast, typical situations are (Entry or exit from car parks, Plates, Special lights, Entrances with shots from inside out, etc.) the compensation of light is one of the most complex possible operations, the BLC function allows a discreet adaptation to these situations

Click to enlarge

The AGC is an integrated signal amplifier that allows vision even in critical conditions. It is automatic and does not require specific settings. Protection level IP67 ( Dust / Immersion )

IK 10 is the highest level of protection from direct damage. This allows the use of the camera even if there is a risk of vandalism

12V DC power supply NOT included.

Power details

Power Supply	12V ±30% DC
power consumption	Max 6.9W (12V DC, IR on)

This camera was made of metal along the entire body.

This product is covered by a 24 month guarantee.