HIKVISION Bullet camera 8MP 4K ir 80

-35%

Telcamera Hikvision DS-2CE19U8T-AIT3Z Bullet Day & Night room type 8MP 4K with mechanical IR cut filter, for outdoor IP67, illuminator EXIR 2.0 integrated up to 80m, double output HDTVi and CVBS, 8MP CMOS sensor, sensitivity 0.003 Lux F1.2 with active AGC , 0 Lux with IR, 2.8-12mm motorized varifocal lens. Support noise reduction, BLC, WDR 120dB, Support Coassiae . 12V DC / 24V DC power supply, operating temperature from -40 ° C to + 60 ° C, IP67

Reference: DS-2CE19U8T-AIT3Z

Brand: Hikvision

EAN: 6954273650117

FIND INSTALLER

https://www.setik.biz/en/cameras/6059-hikvision-ds-2ce19u8t-ait3z-hikvision-bullet-camera-8mp-4k-ir-80.html

€342.58

€527.04 -35%

taxes included

ARE YOU A PROFESSIONAL OF THE SECTOR?
REGISTER TO ACCESS YOUR LIST

PRODUCT NOT AVAILABLE, DISCOUNT NOW 3%

Description Product Details Data Sheet Further Details Download

DS-2CE19U8T-AIT3Z | HIKVISION BULLET CAMERA 8MP 4K HD TVI 2.8-12mm

Outdoor Hikvision camera
Resolution: 8 MP 8Megapixel - 4K - Varifocal lens 2.8- 12mm - CMOS sensor

80M IR Illuminator with EXIR 2.0 Technology - Dual Output HDTVI and CVBS - Day / Night - AGC - BLC - IRC - WDR 120dB - IP67 protection
Power supply NOT included - 24 months warranty

Resolution :
This camera features a resolution of 8MP 4K ULTRA HD (3840 × 2160 pixels)

Optics:
T his camera presents varifocal lens from 2.8-12 mm

IR Infrared Illuminator:
IR Infrared illuminator for better night vision. Range up to 80M

This camera is also equipped with EXIR 2.0 technology.

EXIR 2.0 TECHNOLOGY

This technology remedies the classic disturbances of the traditional IR illuminator.

In detail:

1) NO IR REFLEX OR BLEEDING:
By having the IR LEDs positioned separately from the camera lens, possible internal IR reflections and IR bleeding are completely eliminated, a serious problem on dome cameras due to the presence of the glass dome.

2) BEST IR COVERAGE:
Usually, the IR is integrated into a circular apparatus with various LEDS around the lens.
This very often resulted in an overexposed circular area in the center of the image and underexposed corners due to uneven IR coverage. The rectangular EXIR LEDs provide a much more even coverage across the entire image, eliminating this issue.

3) FEWER PROBLEMS WITH SPIDERS / INSECTS:
Spiders and other insects tend to be attracted to the heat of the hottest IR LEDS in non-EXIR cameras. This problem decreases with EXIR cameras, even more so in flat-faced EXIR cameras, on which the contact surfaces are significantly smaller.

Day / Night:
Allows you to adapt the lens to night / day vision, and the relative automatic management of the IR illuminator, when present.

3D-DNR:
More advanced version of the NOISE REDUCTION management. It allows still images in both low light and movement. Currently the most powerful solution for obtaining maximum results in low light conditions.

IR CUT FILTER (ICR):
Mechanical filter that allows correct viewing of images in daytime viewing conditions. It filters the typical infrared frequencies thus improving the image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies.
Immagine esempio IR CUT FILTER

BLC (Back Light Compensation):
is one of the 3 possible steps in the management of images with contrast, typical situations are (entrances or exits from car parks, plates, special lights, entrances with shots from inside to outside, etc.) light compensation is one of the most complex possible, the BLC function allows a fair adaptation to these situations

Click to enlarge

AGC (Automatic Gain Control):
integrated signal amplifier that allows viewing even in critical conditions. It is automatic and does not require specific settings.

WDR (Wide Dynamic Range):

It is the professional solution in cases where you have to operate in conditions of high light / shadow contrast. Fundamental in the case of shots from the inside out, license plates, shaded spots or all situations where there is no homogeneity of light.

IP67 protection - outdoor:
This camera has IP67 (dust / diving) protection. Suitable for outdoor environments.

Supply:
For the operation of this camera you need a 12V DC or 24V AC power supply (not included).

Data sheet

DS-2CE19U8T-AIT3Z
Room
Image Sensor	8.0 megapixel progressive scan CMOS
Signal System	PAL / NTSC
Video Frame Rate	PAL: 8 MP@12.5fps, 5 MP @ 20fps, 4 MP @ 25fps, 1080p @ 25fps NTSC: 8MP @ 15fps, 5MP @ 20fps, 4MP @ 30fps, 1080p @ 30fps
Resolution	3840 (H) × 2160 (V)
Min. Illumination	0.003 Lux @ (F1.2 AGC ON), 0 Lux with IR
Shutter Time	PAL: 1 / 12.5 s to 1 / 10,000 s NTSC: 1/15 s to 1 / 10,000 s
Lens	2.8 mm to 12 mm
Horizontal Field of View	108.1 ° to 45.6 °
Lens Mount	Ø 14
Day & Night	IR cut filter
Angle Adjustment	Pan: 0 ° to 360 °, Tilt: 0 ° to 90 °, Rotation: 0 ° to 360 °
WDR (Wide Dynamic Range)	Yes, 120 dB
Menu
AGC	Support
D / N Mode	Auto / Color / BW (Black and White)
Image Settings	Contrast, Sharpness, Saturation, Mirror, Defog, HLC
BLC (Backlight Compensation)	Yes
3D DNR	Level 1 to 9
Interface
Video Output	TVI & CVBS
General
Operating Conditions	-40 ° C to 60 ° C (-40 ° F to 140 ° F), Humidity: 90% or less (non-condensation)
Power Supply	12 VDC ± 25%, -A: 12 VDC ± 25%, 24 VAC ± 25%
Consumption	Max.11.5W, -A: Max.14.5W
Protection level	IP67
Material	Metal
Lenguage	English
IR Range	Up to 80 m
Communication	Up the coax, Protocol: HIKVISION-C (TVI output)
Dimension	92 mm × 89 mm × 269.6 mm (3.62 "× 3.5" × 3.34 ")
Weight	Approx. 955 g (2.11 lb.)