Hikvision 2MP Turret Camera 4in1 2.8mm IR

Hikvision 2MP Turret Camera 4in1 2.8mm IR
-35%

Hikvision DS-2CE76D3T-ITMF 2MP CMOS Turbo HD TVI 4in1 camera (TVI/AHD/CVI/CVBS) Turret outdoor camera 2Megapixel, 2.8mm fixed lens, 2.0MP CMOS sensor. EXIR 2.0 illuminator up to 30M with EXIR 2.0 Technology, Supports 3D Digital noise reduction, BLC, Smart IR, WDR 120dB, Up to Coax data with HIKVISON-C. HD-TVI video output, 12Vdc 4.6W power supply, operating temperature from -40°C to +60°C. OSD. IP67

Reference: DS-2CE76D3T-ITMF

Brand: Hikvision

EAN: 6954273682385

FIND INSTALLER

€64.23

€98.82 -35%
taxes included
Tax included
  Hurry up! Only a few pieces left in our warehouse!
discover the available quantity


hikvision_banner.jpg

DS-2CE76D3T-ITMF | HIKVISION 2MP TURRET CAMERA 4IN1 TURBO HD 2.8MM

Made by Hikvision
Hikvision 4IN1 camera (TVI/AHD/CVI/ANALOG) IP67 outdoor
Resolution: 2 MP 2Megapixel - 2.8mm fixed lens - CMOS sensor
20M Smart IR Illuminator with EXIR 2.0 Technology - Day/Night (ICR) - AGC - BLC - SMART IR - WDR 120dB - IP67 Protection
Power supply NOT included - 24 month warranty
DS-2CE76D3T-ITMF

4IN1 TECHNOLOGY:

This camera is a QUADRIBRID (4 integrated technologies)
These cameras are at the same time Analog , AHD , HDCVI and HDTVI .

Resolution:
This camera features a resolution of 1920x1080 FULL-HD
High performance 2 megapixel CMOS sensor

Optics:
This camera has a 2.8mm fixed lens

Infrared IR Illuminator:
Infrared IR illuminator for better night vision. Range up to 30M

This camera also features SMART IR technology.
Through this technology , the light emitted by the LEDs is adapted depending on the object framed.

Smart IR technology

EXIR 2.0 TECHNOLOGY

This technology remedy the classic problems of the traditional IR illuminator.

In detail:

1) NO IR REFLECTION OR BLEEDING:
By having the IR LEDs positioned separately from the camera lens, possible internal IR reflections and IR Bleeding are completely eliminated, a serious problem on dome cameras due to the presence of the glass dome.

2) BEST IR COVERAGE:
Usually, the IR is integrated into a circular apparatus with various LEDS around the lens.
This very often resulted in an overexposed circular area in the center of the image and underexposed corners due to uneven IR coverage. The rectangular EXIR LEDs provide much more even coverage across the entire image, eliminating this issue.


3) FEWER PROBLEMS WITH SPIDERS / INSECTS:
Spiders and other insects tend to be attracted to the heat of the warmer IR LEDs in non-EXIR cameras. This problem decreases with EXIR cameras, even more so in flat-faced EXIR cameras, on which the support surfaces are significantly smaller.

Day/Night:
It allows you to adapt the lens to night/day vision, and the relative automatic management of the IR Illuminator, when present.

IR CUT FILTER (ICR):
Mechanical filter that allows correct viewing of images in daytime viewing conditions. It filters the typical infrared frequencies thus improving image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies.
Immagine esempio IR CUT FILTER
BLC (Back Light Compensation):
it is one of the 3 possible steps in managing images with Contrast, typical situations are (Entries or exits from car parks, license plates, particular lights, entrances with shots from inside to outside, etc.) light compensation is one of the most as complex as possible, the BLC function allows discreet adaptation to these situations


Click to enlarge

AGC (Automatic Gain Control):
integrated signal amplifier that allows viewing even in critical conditions. It is automatic and does not require specific settings.

D-WDR (Digital Wide Dynamic Range):
Software solution of the most powerful WDR integrated into the DSP, exactly as happens for the digital zoom compared to the Optical Zoom, is a software simulation of emulation of the WDR technology, however extremely useful in circumstances of strong contrast.

IP67 protection - outdoor:
This camera is IP67 protected (dust/immersion). Suitable for outdoor environments.

Diet:
A 12V DC power supply is required to operate this camera (not included)

Data sheet

DS-2CE76D3T-ITMF
Room
Image Sensor 2.0 megapixel progressive scan CMOS
Signal System PAL/NTSC
Video Frame Rate PAL: 1080p@25fps
NTSC: 1080p@30fps
Resolution 1920 (H) ×1080 (V)
Min. Illumination 0.005 Lux@(F1.2, AGC ON), 0 Lux with IR
Shuder Time PAL: 1/25 s to 1/50, 000 s
NTSC: 1/30 s to 1/50, 000 s
Slow Shuder Max. 16 Times
Lens 2.8mm
Horizontal Field of View 106°
Lens Mount M12
Day & Night IR cut filter
Angle Adjustment Pan: 0° to 360°, Tilt: 0° to 75°, Rotate: 0° to 360°
SynchronizaAon Internal synchronization
WDR (Wide Dynamic Range) ≥ 120dB
Menu
AGC High/Medium/Low
D/N Mode Auto/Color/BW (Black and White)
Image Mode STD/HIGH-SAT
HLC (Highlight Compensation) Yes
BLC (Backlight Compensation) Yes
WDR Yes
3D DNR Level 1 to 9
Language English
Functions Brightness, Sharpness, 3D DNR, Mirror, Smart IR
Interface
Video Output

1 HD analog output

Switch Budon

TVI/AHD/CVI/CVBS

General
Operating Conditions

-40 °C to 60 °C (-40 °F to 140 °F), Humidity: 90% or less (non-condensing)

Power Supply 12VDC ±25%
Power Consumption Max. 4.6W
Protection level IP67
Material Metal
IR Range Up to 30 m
Communication 89.47 mm × 68.2 mm (3.52" × 2.68")
Weight Approx. 240 g (0.53 lb.)

Further details

DS-2CE76D3T-ITMF

Downloads

Download the English brochure
All our products are in conformity with the in force CE normative (read here). To ask for a copy of the certification fill out this form

OTHER PRODUCTS RELATED TO THIS ITEM

Questions (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha