Il DS-3E1505P-EI di Hikvision, è uno switch di rete 4 Porte. 4 Porte supportano PoE (IEEE 802.3af, IEEE 802.3at) con velocità Gigabit, cui si aggiunge 1 porta Gigabit RJ45 Ethernet. Prodotto realizzato in metallo - Supporta la protezione contro i fulimini 6KV sulle porte PoE - Consente la trasmissione del segnale fino a 300m - MAC Table Adress 2K - Capacità di commutazione 10Gbps - Monitora il corretto funzionamento della rete - PoE Watchdog per rilvemanto di telecamere che non rispondono - Soluzione progettata per sistemi di videosorveglianza.
SCEGLI PROFESSIONISTA
118,16 €
181,78 € -35%
SWITCH DI RETE 4 PORTE ETHERNET - 4 PORTE PoE GIGABIT - 1 Porta RJ45 GIGABIT - HIKVISION - DS-3E1505P-EI
Switch ethernet - 4 Porte - Hikvision - DS-3E1505P-EI
4 Porte PoE Gigabit- 1 Porta Gigabit RJ45 - Mac Address 2K - Capacità di commutazione 10Gbps - Fabbricato con case in metallo - Protezione contro i fulmini 6KV - Trasmissione segnale digitale supportata fino a 300m PoE - Funzionalità PoE Watchdog (rilevamento e riavvio automatico delle telecamere che non rispondono) - Ideale per la configurazione e la gestione di sistemi di videosorveglianza.
Dettagli prodotto
- Switch di rete - HIKVISION - DS-3E1505P-EI
- 4x Porte PoE Gigabit
- 1x Porta Gigabit RJ45
- Standard PoE Supportati: IEEE 802.3af, IEEE 802.3at
- Metallo
- Protezione antifulmine 6KV
- Trasmissione fino a 300m PoE
- Monitoraggio del corretto funzionamento della rete
- MAC Table Size: 2K
- Capacità di commutazione 10Gbps
- Packet Forward Rate: 7.44Mbps
- Cache interna: 1Mbits
- Standard PoE: IEEE 802.3af,IEEE 802.3at
- Case in metallo
- Alimentazione: 54 V DC, 1.2 A
- Temperatura di funzionamento: 0 °C to 40 °C
- Dimensioni: 121.1 mm × 27.6 mm × 83.1 mm
- Peso: 0.26Kg
- Ideale per l'installazione a parete o a desktop
Scheda tecnica
| DS-3E1505P-EI |
|
|
|
Network Parameters |
Ports |
4 × Gigabit PoE port,1 × Gigabit RJ45 port |
|
MAC Address Table |
2K |
|
|
Switching Capacity |
10 Gbps |
|
|
Packet Forwarding Rate |
7.44 Mpps |
|
|
Internal Cache |
1 Mbits |
|
|
PoE Power Supply |
PoE Standard |
IEEE 802.3af,IEEE 802.3at |
|
PoE Power Pin |
End-span: 1/2(-), 3/6(+) |
|
|
PoE Port |
PoE: Ports 1 to 4 |
|
|
Max. Port Power |
30 W |
|
|
PoE Power Budget |
60 W |
|
|
Software Function |
Long Range |
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
Port Isolation |
Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|
|
PoE Watchdog |
Ports 1 to 4: auto detect and restart the cameras that do not respond. |
|
|
Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group. |
|
|
Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP. |
|
|
VLAN |
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
|
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
|
|
System Maintenance |
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. |
|
|
Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
||
|
General |
Shell |
Metal material |
|
Net Weight |
0.26 kg (0.573 lb) |
|
|
Gross Weight |
0.75 kg (1.65 lb) |
|
|
Dimensions (W × H × D) |
121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') |
|
|
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
|
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
|
Operating Humidity |
5% to 95% (no condensation) |
|
|
Relative Humidity |
5% to 95% (no condensation) |
|
|
Power Supply |
54 V DC, 1.2 A |
|
|
Installation Mode |
Desk-Mounted,Wall-Mounted |
|
|
Max. Power Consumption |
65 W |
|
|
Power Consumption in Idle |
0.9 W |
|
|
Surge Protection |
6 kV |
|
|
Approval |
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|
Safety |
CE-LVD (EN 62368-1: 2014+A11: 2017),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition) |
|
|
Chemistry |
CE-RoHS (2011/65/EU),Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU) |
Ulteriori dettagli
Download
Domanda (0)
Non ci sono domande dei clienti per il momento.