Il DS-3E1506P-EI di Hikvision, è uno switch di rete gestito con 4 Porte PoE Gigabit (IEEE 802.3at/af) e 2 porte RJ45 Gigabit - Protezione dai fulmini 6kV - MAC TAble Size 2K - Capacità di switching 14Gbps - Cache interna 1Mbits - Packet Forward Rate 10.42Mbps - Distanza di trasmissione 300m - In metallo - Per montaggio a muro o a scrivania - PoE Watchdog.
SCEGLI PROFESSIONISTA
127,67 €
196,42 € -35%CHRISTMAS WEEK 2024 ×
SPEDIZIONE GRATUITA
SU TUTTO IL CATALOGO!
1. Raggiungi almeno 149€ di spesa
2. Seleziona GLS
3. Conferma il codice NATALE-FREE
4. Concludi il tuo ordine.
La spedizione sarà gratuita!
Fino alle 10:00 del 27/12/2024
Codice NON cumulabile con altri attivi
SWITCH DI RETE GESTITO - 4 PORTE ETHERNET POE GIGABIT - 2 PORTE GIGABIT RJ45 - POE WATCHDOG - TRASMISSIONI FINO A 300M - HIKVISION - DS-3E1506P-EI
Switch ethernet gestito - Hikvision - DS-3E1506P-EI
4 Porte PoE Gigabit - 2 Porte Gigabit RJ45 - MAC Address 2K - Capacità di commutazione 14Gbps - Packet Forward Rate: 10.42 Mpps - Protezione contro i fulmini 6KV - Trasmissione segnale digitale supportata fino a 300m - Cache interna 1Mbits - Ideale per la configurazione e la gestione di sistemi di videosorveglianza - Case fabbricato in metallo -Ideale per il montaggio a parete o a scrivania.
Dettagli prodotto
- Switch di rete - Gestito - HIKVISION - DS-3E1506P-EI
- 4 Porte Ethernet PoE Gigabit
- 2 Porte RJ45 Gigabit
- Standard Supportati: IEEE 802.3at/af
- Protezione antifulmine 6KV
- Trasmissione dati fino a 300m
- MAC Table Size: 2K
- Capacità di commutazione 14Gbps
- Packet Forward Rate: 10.42Mbps
- Cache interna: 1Mbit
- Per il montaggio a muro o a scrivania
- Alimentazione: 54 V DC, 1.2 A
- Dimensioni: 121.1 mm × 27.6 mm × 83.1 mm
- Custodia in metallo
- Peso: 0.27 kg
- Temperatura di funzionamento: 0 °C to 40 °C
Scheda tecnica
| DS-3E1506P-EI |
|
|
|
Network Parameters |
Ports |
4 × Gigabit PoE port,2 × Gigabit RJ45 port |
|
MAC Address Table |
2K |
|
|
Switching Capacity |
14 Gbps |
|
|
Packet Forwarding Rate |
10.42 Mpps |
|
|
Internal Cache |
1 Mbits |
|
|
PoE Power Supply |
PoE Standard |
IEEE 802.3af,IEEE 802.3at |
|
PoE Power Pin |
End-span: 1/2(-), 3/6(+) |
|
|
PoE Port |
PoE: Ports 1 to 4 |
|
|
Max. Port Power |
30 W |
|
|
PoE Power Budget |
60 W |
|
|
Software Function |
Long Range |
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
Port Isolation |
Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|
|
PoE Watchdog |
Ports 1 to 4: auto detect and restart the cameras that do not respond. |
|
|
Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation groups. |
|
|
Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP. |
|
|
VLAN |
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
|
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
|
|
System Maintenance |
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. |
|
|
Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
||
|
General |
Shell |
Metal material |
|
Net Weight |
0.27 kg (0.6 lb) |
|
|
Gross Weight |
0.77 kg (1.7 lb) |
|
|
Dimensions (W × H × D) |
121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') |
|
|
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
|
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
|
Operating Humidity |
5% to 95% (no condensation) |
|
|
Relative Humidity |
5% to 95% (no condensation) |
|
|
Power Supply |
54 V DC, 1.2 A |
|
|
Installation Mode |
Desk-Mounted,Wall-Mounted |
|
|
Max. Power Consumption |
65 W |
|
|
Power Consumption in Idle |
1.6 W |
|
|
Surge Protection |
6 kV |
|
|
Approval |
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|
Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition) |
|
|
Chemistry |
Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU) |
Ulteriori dettagli
Download
Domanda (0)
Non ci sono domande dei clienti per il momento.