Il DS-3E1106P-EI di Hikvision, è uno switch di rete gestito con 4 Porte PoE (IEEE 802.3at/af) e 2 porte per uplink RJ45 100Mbps - Protezione dai fulmini 6kV - MAC Table Size 2K - Capacità di switching 14Gbps - Packet Forwarding Rate: 10.42 Mpps - Distanza max trasmissione PoE: 300m - Struttura in metallo - Per montaggio a muro o a scrivania - Watchdog - Aggiornamento da remoto.
SCEGLI PROFESSIONISTA
SWITCH DI RETE 4 PORTE ETHERNET POE 10/100MBPS - 2 PORTE UPLINK RJ45 10/100MBPS - HIKVISION - DS-3E1106P-EI
Switch ethernet gestito - Hikvision - DS-3E1106P-EI
4 Porte PoE 10/100Mbps - 2 Porte RJ45 10/100Mbps - Mac Address 2K - Struttura fabbricata in metallo - Protezione contro i fulmini 6KV - Trasmissione segnale supportata fino a 300m - Watchdog - MAC Adress Table 2K - Capacità di swicthing 14Gbps - Packet Frowarding Rate: 10.42 Mpps - Scocca in metallo - Ideale per la configurazione e la gestione di sistemi di videosorveglianza.
Dettagli prodotto
- Switch di rete - Hikvision - DS-3E1106P-EI
- 4 Porte Ethernet PoE 10/100Mbps
- 2 Porte RJ45 10/100 Mbps
- Standard Supportati: IEEE 802.3at/af
- Struttura del device: Metallo
- Protezione antifulmine 6KV
- Funzione Watchdog
- Trasmissione dati fino a 300m
- MAC Table Size: 2K
- Packet Forwarding rate: 10.42 Mpps
- Capacità di commutazione 14Gbps
- Aggiornabile da remoto
- Per il montaggio a muro o a scrivania
- Alimentazione: 54 V DC, 1.2 A
- Dimensioni: 121.1 mm × 27.6 mm × 83.1 mm
- Peso: 0.27 kg
- Temperatura di funzionamento: 0 °C to 40 °C
Scheda tecnica
| DS-3E1106P-EI |
|
|
|
Network Parameters |
Ports |
4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port |
|
MAC Address Table |
2K |
|
|
Switching Capacity |
14 Gbps |
|
|
Packet Forwarding Rate |
10.42 Mpps |
|
|
Internal Cache |
1 Mbits |
|
|
PoE Power Supply |
PoE Standard |
IEEE 802.3af,IEEE 802.3at |
|
PoE Power Pin |
End-span: 1/2(-), 3/6(+) |
|
|
PoE Port |
PoE: Ports 1 to 4 |
|
|
Max. Port Power |
30 W |
|
|
PoE Power Budget |
60 W |
|
|
Software Function |
Long Range |
Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
VIP Port |
Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. |
|
|
Port Isolation |
Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|
|
PoE Watchdog |
Ports 1 to 4: auto detect and restart the cameras that do not respond. |
|
|
Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation groups. |
|
|
Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP. |
|
|
VLAN |
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
|
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
|
|
System Maintenance |
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management |
|
|
IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
||
|
General |
Shell |
Metal material |
|
Net Weight |
0.27 kg (0.6 lb) |
|
|
Gross Weight |
0.77 kg (1.7 lb) |
|
|
Dimensions (W × H × D) |
121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') |
|
|
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
|
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
|
Operating Humidity |
5% to 95% (no condensation) |
|
|
Relative Humidity |
5% to 95% (no condensation) |
|
|
Power Supply |
54 V DC, 1.2 A |
|
|
Installation Mode |
Desk-Mounted,Wall-Mounted |
|
|
Max. Power Consumption |
65 W |
|
|
Power Consumption in Idle |
1.6 W |
|
|
Surge Protection |
6 kV |
|
|
Approval |
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|
Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|
|
Chemistry |
Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU) |
Ulteriori dettagli
Download
Domanda (0)
Non ci sono domande dei clienti per il momento.