Switch di rete gestionabile - 8 portePoE 100Mbps - 2 Porte RJ45 Gigabit

-35%

Il DS-3E1310HP-EI di Hikvision, è uno switch di rete gestito con 8 Porte PoE (IEEE 802.3at/af/bt) e 2 porte per uplink RJ45 Gigabit - Protezione dai fulmini 6kV - MAC TAble Size 16K - Capacità di switching 9.2Gbps - Distanza di trasmissione 300m per le porte 1-8 - Protezione IP40 - Hi-PoE sulle porte 1-2 - PoE Watchdog - In metallo - Per montaggio a muro o a scrivania - Prodotto di alta qualità.

Riferimento: DS-3E1310HP-EI

Marca: Hikvision

SCEGLI PROFESSIONISTA

https://www.setik.biz/it/switch/9440-hikvision-ds-3e1310hp-ei-switch-di-rete-gestionabile-8-portepoe-100mbps-2-porte-rj45-gigabit.html

268,03 €

412,36 € -35%

tasse incluse

PER SCOPRIRE IL PREZZO A TE RISERVATO ACCEDI ORA

Quantità

Su ordinazione in 5 giorni

Descrizione Dettagli Prodotto Scheda tecnica Ulteriori Dettagli Download

SWITCH DI RETE 8 PORTE ETHERNET POE 100MBPS (DI CUI 2 HI-POE) - 2 PORTE UPLINK RJ45 GIGABIT - HIKVISION - DS-3E1310HP-EI

Switch ethernet gestito - Hikvision - DS-3E1310HP-EI
8 Porte PoE 100 Mbps - 2 Porte RJ45 Gigabit - Mac Address 16K - Capacità di commutazione 9.2Gbps - Fabbricato in metallo - Protezione contro i fulmini 6KV - Protezione IP40 - Trasmissione segnale digitale supportata fino a 300m - Le telecamere AF/AT possono raggiungere la portata di 300m in extended mode - Hi-PoE sulle porte 1 e 2 - Ideale per la configurazione e la gestione di sistemi di videosorveglianza - Dotato di sistema PoE Watchdog.

Dettagli prodotto

Switch di rete gestionabile - HIKVISION - DS-3E1310HP-EI
8 Porte Ethernet PoE 100Mbps
2 Porte RJ45 Gigabit
Hi-PoE sulla porta 1 e 2
Standard Supportati: IEEE 802.3at/af/bt
In Metallo
PoE Watchdog
Protezione IP40
Protezione antifulmine 6KV
Trasmissione dati fino a 300m
MAC Table Size: 16K
Capacità di commutazione 9.2Gbps
Per il montaggio a muro o a scrivania
Alimentazione: 54 VDC, 2.22 A
Dimensioni: 217.6 mm × 27.8 mm × 103.35 mm
Peso: 0.550 kg
Temperatura di funzionamento: 0°C to 40°C

Scheda tecnica

DS-3E1310HP-EI
Network Parameters	Ports	8 × 10/100 Mbps PoE port, 2 × Gigabit RJ45 port
	MAC Address Table	16 K
	Switching Capacity	9.2 Gbps
	Packet Forwarding Rate	6.84 Mpps
	Internal Cache	4 Mbits
PoE Power Supply	PoE Standard	IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
	PoE Power Pin	8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
	PoE Port	Hi-PoE: Ports 1 to 2, PoE: Ports 3 to 8
	Max. Port Power	90 W
	PoE Power Budget	110 W
Software Function	Long Range	Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
	PoE Watchdog	Ports 1 to 8: auto detect and restart the cameras that do not respond.
	HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
	System Maintenance	Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
	Storm Control	Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.

		Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
	QoS	QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
	DHCP Snooping	DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default.
	Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
	VLAN	VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. VLAN.
	Port Rate-Limiting	Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
General	Shell	Metal material, IP40
	Net Weight	0.550 kg (1.21 lb)
	Gross Weight	0.950 kg (2.09 lb)
	Dimensions (W × H × D)	217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
	Operating Temperature	0°C to 40°C (0°F to 104°F)
	Storage Temperature	-40°C to 85°C (-40°F to 185°F)
	Operating Humidity	5% to 95% (no condensation)
	Relative Humidity	5% to 95% (no condensation)
	Power Supply	54 VDC, 2.22 A
	Installation Mode	Desk-Mounted; Wall-Mounted;
	Max. Power Consumption	120 W
	Power Consumption in Idle	4W
	Surge Protection	6 KV
Approval	EMC	FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017);

		IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
	Safety	UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
	Chemistry	CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)