-35%
Nuovo
Il DS-3E1310P-EI/M di Hikvision, è uno switch intelligente con 8 porte 10/100 Mbps Po + 2 Gigabit RJ45. Le porte PoE sono dotate di protezione da sovratensione 6 KV e Standard IEEE 802.3at / af. Funzione Watchdog PoE per rilevare e riavviare automaticamente le telecamere che non rispondono. Gestione della topologia della rete, push degli allarmi, monitoraggio dello stato della rete. La camera AF / AT può raggiungere fino a 300 m in modalità estesa. Vari protocolli di gestione di livello 2 come VLAN
SCEGLI PROFESSIONISTA
SWITCH INTELLIGENTE 8 PORTE 10/100 Mbps POE + 2 GIGABIT RJ45 - HIKVISION
Switch intelligente - Hikvision
8 porte 10/100 Mbps PoE + 2 Gigabit RJ45 - Funzione Watchdog PoE - Per porte PoE: Protezione da sovratensioni 6 KV e Standard IEEE 802.3at / af - Vari protocolli di gestione di livello 2
Dettagli prodotto
- Switch intelligente - Hikvision
- 8 porte 10/100 Mbps PoE + 2 Gigabit RJ45
- Standard IEEE 802.3at / af per le porte PoE
- Gestione della topologia della rete
- Push degli allarmi
- Monitoraggio dello stato della rete
- Protezione da sovratensioni 6 KV per porte PoE
- La camera AF / AT può raggiungere fino a 300 m in modalità estesa
- Watchdog PoE per rilevare e riavviare automaticamente le telecamere che non rispondono
- Vari protocolli di gestione di livello 2 come VLAN
Scheda tecnica
| Model | DS-3E1310P-EI/M |
| General | |
| Shell | Metal material |
| Net Weight | 0.54 kg (1.19 lb) |
| Gross Weight | 1.08 kg (2.38 lb) |
| Dimension (W × H × D) | 217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'') |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Power Supply | DC54 V,1.2 A |
| Installation Mode | Desk-Mounted,Wall-Mounted |
| Max. Power Consumption | 65 W |
| Power Consumption in Idle | 5 W |
| Surge Protection | 6 KV |
| Network Parameters | |
| Port Number | 8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port |
| MAC Address Table | 4 K |
| Switching Capacity | Whole-Device Performance: 9.6 Gbps Port Performance: 5.6 Gbps |
| Packet Forwarding Rate | Whole-Device Performance: 7.14 Mpps Port Performance: 4.17 Mpps |
| Internal Cache | 2 Mbits |
| PoE Power Supply | |
| PoE Standard | IEEE 802.3af, IEEE 802.3at |
| PoE Power Pin |
End-span: 1/2(-), 3/6(+) |
| PoE Port | PoE: Ports 1 to 8 |
| Max. Port Power | 30 W |
| PoE Power Budget | 60 W |
| Software Function | |
| Long Range | Up to 300 m transmission Long range performance may vary depend on camera model or cable condition. |
| Port Isolation | Ports 1 to 8: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 8: auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. |
| Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. |
| Approval | |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU) WEEE (2012/19/EU) Reach (Regulation (EC) No.1907/2006) |
Ulteriori dettagli
Download
Tutti i nostri prodotti sono conformi alla normativa CE vigente (leggi qui). Per richiedere la copia del certificato
compila questo modulo
Domanda (0)
Non ci sono domande dei clienti per il momento.
La tua domanda è stata inviata con successo il nostro team. Grazie per la domanda!
Fai una domanda
nascondere la forma