-35%
nuevo
Hikvision DS-3T1528HP-SI-24P4F is a 24-port 10/100/1000 Mbps PoE + 4 Gigabit Fiber Optic intelligent switch. The PoE ports are equipped with 6KV surge protection and IEEE 802.3at/af standard . PoE Watchdog function to automatically detect and reboot unresponsive cameras. Network topology management, alarm push, network status monitoring. AF/AT camera can reach up to 300m in extended mode. Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS, etc.
BUSQUE INSTALADOR
24 PORT GIGABIT POE + 4 GIGABIT FIBER OPTIC INTELLIGENT SWITCH - HIKVISION
Smart Switch - Hikvision
24 Ports 10/100/1000 Mbps PoE + 4 Gigabit Fiber Optic - PoE Watchdog Function - For PoE Ports: 6KV Surge Protection and IEEE 802.3at/af Standard - Various Layer 2 Management Protocols
Product details
- Smart Switch - Hikvision
- 24 Ports 10/100/1000 Mbps PoE +4 Gigabit Fiber Optic
- IEEE 802.3at/af standard for PoE ports
- Network topology management
- Push alarms
- Network health monitoring
- 6KV Surge Protection for PoE Ports
- Maximum PoE power consumption: 480W
- The AF/AT camera can reach up to 300m in extended mode
- PoE Watchdog to automatically detect and reboot unresponsive cameras
- Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS, etc.
Technical data sheet
| Model | DS-3T1528HP-SI-24P4F |
| General | |
| Power Supply | 48-57 V DC, 12 A 52 V~57 V recommended input voltage to ensure stable power supply. Support dual power inputs and hot backup. |
| Surge Protection | 6 KV |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Shell | Metal material, IP40 |
| Net Weight | 3.23 kg (7.13 lb) |
| Gross Weight | 4.00 kg (8.82 lb) |
| Dimensions (W × H × D) | 440 mm × 44 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'') |
| Operating Temperature | 0 °C to 45 °C (0 °F to 113 °F) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Installation Mode | Desk-Mounted,Rack (equipped with mounting ears) |
| Max. Power Consumption | 500W |
| Power Consumption at Idle | 20W |
| Network Parameters | |
| Port Number | 24 × Gigabit PoE port, 4 × Gigabit fiber optical port |
| MAC Address Table | 8K |
| Switching Capacity | Whole-Device Performance: 56Gbps Port Performance: 56 Gbps |
| Packet Forwarding Rate | Whole-Device Performance: 41.66 Mpps Port Performance: 41.66 Mpps |
| Internal Cache | 4.1 Mbits |
| PoE Power Supply | |
| PoE Standard | Ports 1 to 4: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 5 to 24: IEEE 802.3af, IEEE 802.3at |
| PoE Power Pin |
Ports 1 to 4: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Port | Hi-PoE: Ports 1 to 4 PoE: Ports 5 to 24 |
| Max. Port Power | Ports 1 to 4: 90W Ports 5 to 24: 30W |
| PoE Power Budget | 480W |
| Software Function | |
| Long Range | Ports 1 to 24: up to 300 m. Long range performance may vary depending on camera model or cable condition. |
| Port Isolation | Ports 1 to 24: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 24: auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS |
| QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLANs. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
| Port Rate Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. |
| Storm Control |
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. |
| DHCP Snooping | DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. |
| ACL | Port security strategy. Support up to 64 ACL entries. Support up to 128 configuration rules under all ACL entries. |
| IPSG | IPSG can control the security of port access device. Support port, MAC, IP binding. Support 256 security entries. |
| Approval | |
| EMC | FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015) |
| Safety | UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006) |
Further details
Download
Brochure not available
All our products are in conformity with the in force CE normative (read here). To ask for a copy of the certification
fill out this form
Pregunta (0)
No hay preguntas de los clientes por ahora.
Su pregunta se ha enviado con éxito a nuestro equipo. Gracias por la pregunta!
Empezar una nueva conversación
esconder forma